About Tall Bell Water Feature
Height, not spread, is what this feature buys you. The bell runs upright, lifting water to standing eye level in a garden bed, a paved courtyard or an alfresco entertaining area without taking the floor space a wide basin would. In a courtyard where every square metre is already spoken for, that is usually the deciding factor.
Polystone Resin does the structural work. It carries the shape through outdoor weather and keeps the overall weight manageable, which matters when you are still deciding exactly where the piece sits. Water runs across the curve of the bell rather than dropping off an edge, and that gives you a continuous, even sound instead of a splash — enough to take the edge off road noise or neighbours over the fence. Setting it up is straightforward: level the spot, fill the reservoir, run the pump.
The same bell profile is made as a planter if you want the two reading together across a courtyard — see the Bell Planter. For current sizes, showroom displays and site delivery in Perth, contact us about a product or project.
Does it need a prepared base?
Yes — the centre of gravity sits high on this one, so it wants a solid, level surface: concrete pavers, a poured pad, or decking that does not flex. Get it plumb and the water sheets evenly all the way round the bell. Out by a few degrees and it will favour one side, which you will notice straight away.
Where should it sit to keep spray off the paving?
Anything running down a tall surface is fair game for an afternoon sea breeze. Tuck it against a courtyard wall, solid fencing or a hedge so it has partial shelter on the windward side; you will lose far less water and top up less often.
How much upkeep does it need week to week?
Check the reservoir level once a week and skim off fallen leaves. Through a hot summer, look at it every few days instead — the pump intake has to stay covered, and a pump run dry is the one failure that will cost you a motor. The pale mineral rings that form at the water line come away with a damp cloth worked at wet, not a scourer, and a fountain water conditioner in the reservoir keeps algae down without affecting the finish.
