About Diamond Water Feature
The Diamond Water Feature combines traditional ceramic pottery with clean hydraulic design. Measuring 56W x 115H, this durable high-fired clay fountain is sealed on the outside to maintain a watertight shell. Its contoured, curved top directs water smoothly over the rim, guiding an even sheet of water down the outer sides to generate a soothing acoustic trickle while keeping splash to a minimum.
Adaptable to different garden layouts, the feature can be supplied with an optional plinth to mount securely inside an existing garden pond. Alternatively, as a self-contained unit, it comes with a 670 mm round basin that can either be set into the ground flush with surrounding paving or placed above ground on a patio. Explore our complete water features and fountains collection or contact us about a product or project to discuss reservoir options and site delivery across Perth.
What base preparation is required when installing the 670 mm basin above ground?
Place the 670 mm round basin on a solid, level surface such as concrete pavers, a poured concrete pad, or level timber decking. Levelling the base is critical so the water spilling over the curved top sheets evenly around all sides rather than running down one edge.
How do you install the Diamond Water Feature in an existing pond using a plinth?
The optional plinth raises the base of the high-fired clay feature above the pond’s operating water level. Water is pumped to the curved top and sheets down the sides directly into your pond, incorporating into the existing pond eco-system.
How do you manage wind drift and splash in open courtyards?
Because water clings closely to the clay walls as it cascades from the curved top, the feature produces minimal splash in sheltered spaces. If positioned in open coastal winds, using an inline valve on the pump hose allows you to fine-tune the flow rate to maintain clean water adhesion.
How should the externally sealed clay surface be maintained?
Periodically wipe down the clay exterior with a soft cloth and fresh water to remove dust and mineral deposits from tap water. In summer heat, inspect the 670 mm reservoir weekly and top up as needed so the submersible pump remains fully covered.
