Water Features and Fountains in Perth

Plug-and-go fountain systems and custom workshop builds

Water features add sensory movement and architectural structure to residential courtyards, alfresco dining areas and commercial landscapes. Our collection offers two distinct pathways to introduce running water:

• Self-contained plug-and-go units: Most showroom display models are fully self-contained systems with integrated reservoirs. Level the base on pavers or decking, fill the reservoir with water, submerge the pump, and plug into a standard weatherproof 240V outdoor power outlet. They require no mains plumbing connections or site excavation.
• Custom workshop conversions: When specific garden layouts or courtyard niches require tailored proportions, we configure custom water features to order in our Malaga workshop. By core-drilling stone bowls, Atlantis clay urns or fibreglass troughs, we fit internal risers, spillways and submersible pumps tailored to your exact spatial and acoustic preferences. Purpose-built urn and bowl water features in our collection include the Atlantis Urn Water Feature, Atlantis 3 Urns Water Feature, Classical Urn Water Feature, Stacked Stone Large Water Feature, and the Utah Water Feature 85x90. The Made-to-Order Double Bowl Water Feature and Diamond Water Feature are available as custom configurations. For vessels you wish to convert yourself, browse our garden urns and Atlantis planters collections.

Selecting water features by acoustic profile and site conditions

Water features vary significantly in their sound volume and splash radius:

• Gentle bubbling urns and reflection pools: Systems like the Positino Water Feature, Contemporary Bowl Water Feature, Dimple Fountain, Nest Water Feature and Goni Cimstone Water Feature produce soft, low-decibel trickling sounds suited for enclosed courtyards and intimate outdoor dining tables where conversation takes priority.
• Mid-scale cascades and bowl fountains: The Low Bowl 110 Water Feature, Low Bowl 850 Fountain, Low Bowl Double Water Feature 150, Tall Bell Water Feature, Tall Dimple Water Feature and Courtyard Fountain provide moderate water movement suited for open garden settings and pool surrounds.
• Dynamic cascading and multi-spout fountains: Multi-tiered units such as the 4 Spout Water Feature Including Pump, Waverley Water Feature, Rome Water Feature and Millstone Water Feature generate robust, multi-tonal white noise that masks traffic noise, air conditioning units and neighbourhood commotion.

Matching the pump to the feature

Pump selection comes down to two numbers: flow velocity and head height. Flow velocity governs how much water moves through the system, which shapes the sound and the visible spill across a bowl lip or millstone face. Head height is the vertical distance the pump must lift water from the reservoir to the highest outlet, and it rises with every additional riser or tier. An undersized pump starves a multi-spout cascade; an oversized one throws water past the catchment and empties the reservoir. We size pumps against both figures for every custom build.

Built for Perth conditions

Our fountains use UV-stable materials, sealed finishes and powder-coated or marine-grade fixings so colours hold up under long, intense summer sun rather than chalking or fading. Perth's hard scheme water leaves mineral deposits on spillways and dark stone surfaces over time, so choose textured or lighter finishes where staining would be noticeable, and wipe down visible faces periodically. On decking, confirm the joists can carry the filled weight of the feature, and on paving, bed the base dead level so the water sheets evenly on all sides. Sheltered courtyards hold the sound beautifully, while exposed positions benefit from a lower, wider design that resists wind splash-out.

Summer evaporation rates and submersible pump maintenance

In Perth's Mediterranean summer climate, hot dry easterly winds and 40°C heatwaves cause rapid water evaporation. Open bowls and wide spillways can lose several centimetres of water in a single afternoon. If the reservoir water level drops below the pump's intake grid, the submersible pump will draw in air, run dry and overheat.

To ensure long-term pump reliability, check and top up the water reservoir regularly during the summer months, or install a mechanical float valve connected to garden drip irrigation for automated top-ups. Rinse the filter sponge and intake grid every few months to clear leaf litter and grit, and drain and clean the reservoir at the start of each season. We source all submersible pumps from local Western Australian distributors, ensuring immediate access to replacement impellers, filter sponges and manufacturer support.

For custom water feature builds, project enquiries or pump replacement advice, contact our Malaga team.

Frequently asked questions

Are all water features plug-and-go?

Most display models are self-contained plug-and-go units designed for straightforward DIY setup without licensed plumbers. We also build custom made-to-order water features from our pot and urn ranges in our Malaga workshop.

Do water features include the circulation pump?

Pump inclusion depends on the model. The 4 Spout Water Feature Including Pump includes a matched pump. Other standalone vessels allow you to select a pump matched to your preferred water flow velocity and head height. We supply pumps from local WA distributors for all installations.

Where is the best place to position a water feature in a Perth courtyard?

Place the feature where you will actually hear it, typically within a few metres of seating or an open doorway, and against a wall or dense planting that reflects sound back into the space. Avoid positioning directly under deciduous trees, which drop leaves into the reservoir and clog the pump inlet. Keep the unit within reach of a weatherproof outdoor power outlet, and allow clearance behind for access to the pump.

Can water features be placed on timber decking or tiled balconies?

Yes. Self-contained units retain their water internally within sealed reservoirs, making them suitable for timber decks and tiled verandas. Ensure the supporting floor structure can support the total weight of the vessel, reservoir water and pump assembly.

What maintenance is required to prevent algae and scale buildup?

Keep the pump inlet screen free of fallen leaves and organic debris. Periodically run the pump in a bucket of dilute white vinegar to dissolve mineral scale from hard Perth scheme water, and use non-toxic water feature clarifying treatments to prevent algae growth without harming visiting birds or pets.

Can I convert an existing garden pot or urn into a fountain?

Yes. We regularly core-drill and plumb pots, bowls and urns from our collection into functioning water features, fitting internal risers, spillways and submersible pumps tailored to your outdoor space. Atlantis terracotta urns and fibreglass vessels from our garden urns collection are particularly well-suited to fountain conversion.

How do I choose between a gentle bubbling fountain and a multi-spout cascade?

Choose a gentle bubbling urn or reflection pool for enclosed courtyards and dining areas where quiet conversation is a priority, since the soft trickle adds ambience without competing with speech. Choose a multi-spout cascade or millstone design for open gardens, pool surrounds or street-facing courtyards where you want the water sound to mask traffic noise or air conditioning units.