Polystone Resin Pots and Planters in Perth

Polystone Resin suits Perth gardens, courtyards, commercial entries and alfresco dining. An empty planter is light enough for two people to carry through a garden gate and easy to reposition on a patio, and the finish range runs from the standard factory colours through to the special finishes and custom Dulux Weathershield matching done in Malaga.

The look of poured concrete, without the weight

Polystone Resin is made by blending finely powdered natural stone with polymer resin and a waterproof liquid membrane. Once cured, the composite carries the mineral depth, density and clean lines of architectural concrete while weighing around two-thirds less when empty. The membrane is part of the mix rather than a coating brushed over the top, so the surface holds off moisture, grime and salt air far better than unsealed precast cement, which tends to chalk and flake in Western Australian conditions.

What sets Polystone Resin apart is the surface: smooth and refined, closer to poured architectural concrete than to textured natural stone. It is the one to choose when a project calls for a clean, contemporary concrete finish rather than rough masonry. For a textured stone surface, compare our Light Stone planters. For the lightest pots in our range, see our fibreglass collection. To compare every material side by side, start with our garden pots and planters range.

Colours, and matching them to your build

The Polystone Resin range sits comfortably alongside contemporary facades, render colours and paving.

Standard factory finishes include Cement Grey, Dark Grey, Charcoal Black, White and Brown Terrazzo, with special factory finishes in Matte Black, High Gloss colours and Wood Grain. Projects often need to line up with Colorbond trims, an exterior paint schedule or an interior scheme, so we also finish planters in-house at our Malaga workshop. We can finish a planter in any Dulux Weathershield exterior acrylic colour, which gives you exact control over the palette with UV-stabilised exterior performance.

Choosing a shape: bowls, cubes, cylinders, eggs and troughs

The collection covers the geometric profiles most projects call for:

• Shallow vessels and low bowls: The Crucible Planter, Diva Low Bowl Planter, Succulent Low Rise Bowls and Low Bowl Planter (in several sizes up to 150 cm diameter) give you a broad planting surface for succulents, bromeliads and accent foliage without blocking the view across an outdoor dining area or a poolside plinth.
• Egg and bell forms: Egg Planters in five sizes, the Extra Large Egg Planter, Bell Planter and Ball Planter bring rounded, organic shapes to a courtyard corner or an entry you want framed.
• Upright and tapered forms: The Cylinder Planter, Tall Drum Pot, Polystone Resin LUMA Planter, Wide Taper, Tall Square Planter and Tall Square Taper Planter give you clean vertical lines beside entry porticos and courtyard piers.
• Architectural cubes: The Polystone Resin Cube Planter and Polystone Resin Cubes on Feet Planter (four sizes from 60x60x68 to 110x110x110 cm) hold a crisp geometric line. The feet lift the base clear of the ground, so water drains away freely and air moves underneath instead of pooling and marking travertine, limestone or poured aggregate.
• Tub, box and sphere accents: The Polystone Resin Tub Planter, Large Box Planters and Sphere Balls (three sizes) suit mass plantings, wide garden beds and smaller decorative groupings.
• Linear troughs and screens: Divider troughs and oblong profiles give you a green privacy screen straight away along a boundary fence or between alfresco seating zones, and they pair with our trough planters collection.
• Oversize formats: The Giant Egg Planter and Extra Large Egg Planter hold the soil volume a specimen tree or an architectural palm needs. Browse our oversize planters collection for the full range of extra-large options.

Perth heat, drainage and the weight once it is planted

An empty Polystone Resin planter is light enough to carry through a standard garden gate, and light enough to shift again if the courtyard layout changes. The weight climbs quickly once it holds damp potting mix, drainage gravel and an established root ball. A 150 cm trough holds roughly 375 litres and reaches 450 to 560 kg once saturated. A 100 cm cube holds closer to 900 litres and can exceed 1,000 kg. Set the empty container where you want it and think about where the water will drain before you fill it. On a balcony or rooftop, check the floor rating first; for a suspended slab, have your builder confirm the load. For soil volume estimates, use our potting mix calculator.

Through a Perth summer, dark charcoal and black planters take on plenty of heat. If a dark container is going into direct western sun, choose heat-tolerant species or line the inside perimeter to buffer root temperatures through a run of hot days.

Outdoors, raise containers on pot feet so drainage water runs away cleanly and you avoid moisture rings on porous limestone, travertine or poured aggregate pavers.

Come and see it in person

Concrete-look finishes are hard to judge from a photograph, and proportion is harder again. More than 200 styles are on display at our Malaga showroom, so you can stand a Cube on Feet next to an Egg Planter, compare Cement Grey against Charcoal Black in daylight, and see how each one reads at the scale you have in mind. Bring your paving sample, your render colour or your Colorbond swatch and we will match it. Ask us about Perth metropolitan delivery, and if the project sits outside the metro area our team can help with freight to regional WA. For a larger garden or a commercial entry, talk to us about an on-site consultation.

Common questions

How does Polystone Resin compare in weight to cast concrete?

Empty, a Polystone Resin container weighs roughly 65% to 70% less than the equivalent cast concrete pot. In practice that means two people can carry a large planter through a side gate, up a flight of steps or out onto a balcony by hand. It is also easy to reposition later, which is why it suits upper-level courtyards and terraces where heavier masonry is not an option.

Can Polystone Resin pots be painted to match specific house colours?

Yes. The surface takes exterior acrylic masonry paint readily. Beyond the factory stock colours, we finish containers at our Malaga workshop in custom Dulux Weathershield colours, so you can match Colorbond finishes such as Monument, Surfmist or Woodland Grey.

Why choose Cubes on Feet over flat-bottom planters?

Cubes on Feet sit on five moulded riser feet that lift the base above ground level, leaving clearance for drainage water to discharge and for air to move underneath. That gap keeps water from sitting beneath the pot, which is what discolours pavers, marks tiles and rots decking over time.

Do dark Polystone planters heat up in direct Perth summer sun?

Dark grey and charcoal absorb plenty of radiant heat on a 35 to 40 degree afternoon. The composite itself holds its shape, but the soil around the outside of the pot warms faster than the centre. On hot north- or west-facing paving, mulch the top of the mix and keep the watering consistent and the roots will cope.

Does Polystone Resin need sealing before outdoor use?

No. The waterproof liquid membrane goes in during manufacture and forms part of the composite, so there is no annual sealing or re-coating to keep up with. That is the practical difference from unsealed precast concrete, which draws moisture into the surface. A wash with clean water is all the upkeep it asks for.

Can I see the range in Perth, and how do I get a planter home?

You are welcome to collect from our Malaga showroom, and we deliver across the Perth metropolitan area. If your project is in regional Western Australia, tell us where it is going and our team will help organise freight. Ring us or drop into the showroom and we can talk through sizes, finishes and timing for the whole order.